Browse all practice questions for the 7B Wood Destroying Pests Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

7B Wood Destroying Pests Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Which statement is not true about fumigants?
  • What should be done if a strong odor persists after treating a structure with sub slab heating ducts?
  • Is soil treatment to control termites always possible for all structures?
  • Which Michigan regulation ensures that pesticide application avoids off-target discharges?
  • Which type of repellent is considered most effective against bats?
  • Which is true about sand barriers used in termite prevention?
  • Which of the following statements is NOT true about wood-staining fungi?
  • On which segment of an insect's body are legs and wings typically attached?
  • True or False: It is recommended to use an oil solution when treating finished wood to avoid altering appearance.
  • What environmental conditions favor fungi growth the most?
  • What is a characteristic of brown rot fungi?
  • Who is primarily responsible for preventing wood attacks before use?
  • What is the primary purpose of using the backflow preventer in pest management?
  • What is the size and color characteristics of fresh Norway rat droppings?
  • What is the lifecycle characteristic of ants that differentiates them from termites?
  • True or False: Treating soil with insecticides to prevent termite infestations will substitute for faulty construction methods.
  • What is the best method for controlling wood decay fungi?
  • Dampwood termites require which condition for survival?
  • In pest management, what is the significance of trench depth?
  • True or False: Borates injected into wood for local control of termites have shown potential in preventing infestations.
  • Which construction type has typical termite entry points similar to basement construction?
  • What is the most practical method to treat soil in monolithic slab construction?
  • Can habitat alteration alone control certain powderpost beetle infestations?
  • What type of construction utilizes a crawlspace as a giant heating/cooling duct?
  • What should typically be done after treating an area that has wooden members in contact with concrete?
  • Which statement is true about termite baits?
  • What is a common form of treatment used to protect buildings from termites?
  • When injecting into vertically drilled holes, what pressure should be used?
  • What is the recommended crawl space trench length for effective pest control?
  • Termites are more prevalent in which type of soil?
  • Where should control activities be focused if true powderpost beetles are identified as causing damage?
  • In pest management, what does a higher population of roaches typically indicate?
  • Which of the following is a means of communication within the termite colony?
  • What is a characteristic of borates used for termite control?
  • What legislation gives the Michigan Department of Agriculture authority to certify commercial applicators?
  • What is the primary purpose of using rat glue boards in pest control?
  • Which beetles' larvae feed on the flesh of birds and mammals?
  • Do Category 7B technicians need to worry about harming endangered species?
  • What basic measure can help prevent termite infestation in crawl spaces?
  • What tools are categorized as hand dusters?
  • What is a characteristic of a floating slab?
  • What moisture content is generally considered manageable for fungal growth?
  • How do termites and ants differ in physical characteristics?
  • What are the stages of insects that undergo complete metamorphosis?
  • Why is it important to consult with the customer about persistent odors after treatment?
  • When controlling termites in basements with French drains and sump parts, what is the recommended initial action?
  • Does a poorly ventilated crawl space produce up to 100 pounds of water per day per 1,000 square feet?
  • In addition to wood strength, what is another potential impact of wood-staining fungi?
  • Which statement is false regarding termite control operations around dirt-filled concrete porches on frame houses?
  • Which treatment method should be avoided for brick or stone veneer if the brick ledge is accessible?
  • How can the infestation of carpenter ants typically be minimized?
  • Which of the following insects is known for being attracted to spoiled food?
  • Which powderpost beetle is known for creating a ticking sound?
  • What is a common feature of wood-destroying insects?
  • What is a preferred option to vertical drilling when no access is available from inside?
  • Is it necessary to inspect painted wood surfaces for powderpost beetle infestations?
  • Carpenter ants primarily forage for which of the following?
  • What is true about the use of treated lumber to prevent termite infestations?
  • Which of the following best describes biotermiticides?
  • Which pest control method is enhanced by the use of synthetic insecticides?
  • Which type of slab is formed as one continuous unit with the footing?
  • What is the correct classification of wood-destroying fungi?
  • What effect do integrated pest management practices have when used along with pesticide applications?
  • What is a characteristic feature of longhorned beetles?
  • What is true about wood injection or aerosol formulations of insecticides for termites?
  • The principles used for termite control in dirt-filled concrete porches apply to which of the following?
  • Which characteristic pertains to the Lyctidae family of beetles?
  • What do soldier termites primarily do?
  • Which type of slab-on-ground construction is most susceptible to termite attack?
  • What is the lowest action threshold for cockroaches in a facility?
  • What corrective action should be taken when wooden members extend through the concrete in the basement floor?
  • What structural element is critical to examine as it can contribute to termite entry?
  • Under what condition can you wear a short sleeve shirt in a pest control environment?
  • Which characteristic is not associated with carpenter bees?
  • Subterranean termites cannot survive without what?
  • What should be included in postconstruction treatment of a crawl space?
  • What is a key characteristic of worker termites?
  • Which pest is considered the most common in the longhorned beetle family?
  • Do integrated pest management practices reduce the application frequency of pesticides?
  • What is Trophallaxis used for within the termite colony?
  • Is it true or false that termite colonies may be crowded out by rapid fungal growth?
  • Holes drilled to treat concrete block foundation voids should be done at what height?
  • What is the appropriate spacing for vents in attics?
  • Which of the following pest control measures is necessary for handling wood-boring beetle infestations?
  • What is the typical duration for an effective treatment process in pest control?
  • What type of body shape do false powderpost beetles have?
  • What temperature is used in a heat chamber treatment for drywood termites?
  • If a carpenter ant colony is found outside but causing problems inside a building, what should the client be advised to do?
  • What size hole can mice typically squeeze through?
  • Which treatment method is recommended for areas with subslab heating ducts?
  • Why are backflow preventers important in pest control settings?
  • What material is recommended for constructing a power sprayer tank to resist corrosion?
  • Are customers entitled to receive pesticide product labels and MSDS sheets upon request?
  • How far apart should drilled holes be when treating concrete block foundation voids?
  • If bostrichid or anobiid beetles are identified as causing damage, where should applications be concentrated for control?
  • What should be monitored in a crawl space to aid in termite prevention?
  • Is pesticide application the sole means of controlling pests in structures?
  • Termites undergo what type of metamorphosis?
  • What is a distinctive feature of Anobidae beetles?
  • What must a vehicle transporting pesticides include according to Michigan regulations?
  • What is a common feature of effective termite barriers?
  • When should you drill and treat brick or stone veneer?
  • True or False: The old house borer is often a pest in newer structures but can also be found in older buildings.
  • Who prescribes the standards for certification of commercial pesticide applicators in Michigan?
  • Which would be an effective barrier against subterranean termite infestations?
  • When trenching or rodding building exteriors, soil should be saturated to which level?
  • What allows termites to easily infest crawl spaces?
  • Which termite species is most commonly found in Michigan?
  • What is a characteristic of a suspended slab?
  • Which pest management practice involves the use of non-chemical means?
  • Which length of hose is commonly recommended for termite control operations?
  • Which statement best describes white rot fungi?
  • Which insecticide is known for its systemic action against termites?
  • Which method is often used to reinforce traditional termite prevention strategies?
  • What is an important consideration when determining drill hole spacing?
  • Which wood-destroying insect family primarily causes damage through its larvae?
  • True or False: A homeowner should fill caps on a private well before applying termiticide when switching to a public water supply.
  • Which of the following is a benefit of using borates in pest control?
  • Which condition is most conducive to the strength loss in wood from decay fungi?
  • Which type of construction does not typically require interior perimeter treating of the foundation?
  • Which method is NOT advisable for dealing with moisture issues in the basement before treatment?
  • What is the approximate size range for true powderpost beetles?
  • What is the recommended approach for termite control around wells, cisterns, and other water sources?
  • What should be regularly checked to minimize pest infestation?
  • How should routine soil retreatments for termite control be conducted?
  • Which caste contains individuals that leave to swarm and form new colonies?
  • Which of the following methods is uncommon for indoor slab treatments?
  • What is a key consideration when planning pesticide applications for termite control?
  • True or False: Dry Rot refers to brown rot fungi infecting completely dry wood.
  • What is the notification requirement after insecticide application in schools?
  • What commonly indicates a powderpost beetle infestation?
  • What is true regarding the application of termiticide around subslab heating ducts?
  • What situation can lead to contamination of water supplies during pesticide application?
  • Which statement is not true regarding decay fungi?
  • What type of baits act as insect growth regulators?
  • Which type of insect is known to feed on wood?
  • What information must commercial pesticide applicators provide in the Applicator Service Agreement?
  • What must be printed on the exterior of a vehicle used to transport pesticides?
  • Which fungi can usually be brushed or washed off from wood surfaces?
  • What is considered a crucial treatment method for stopping wood decay?
  • What is an important feature of the pump in a power sprayer?
  • Which factor is least likely to affect termite behavior?
  • What stage of metamorphosis features a nymph stage?
  • What is a true statement about non-plenum crawl spaces?
  • What is the primary focus of termite prevention methods?
  • How can termites enter structures?
  • The old house borer belongs to which beetle family?
  • Which statement about fungi is incorrect?
  • What is not a characteristic of the old house borer?
  • Which statement is not true about termite baits?
  • What is a common characteristic of mold?
  • Which substance is commonly used to protect wood from insect damage?
  • Where are logical places to inspect for subterranean termites?
  • What is the role of primary reproductives in a termite colony?
  • Which insect family is commonly associated with powdered frass and exit holes in wood?
  • Which statement is true about fumigants?
  • What type of synthetic insecticide is known to repel termites effectively?
  • Which of the following describes pest management efforts that exclude pesticide use?
  • What should a pest management professional do if they discover white pocket rot in a home?
  • Is it true that wood treatment is most likely required in monolithic slab construction?
  • What type of fungi causes discoloration specifically in sapwood?
  • What physical feature are carpenter bees known for?
  • Which characteristic distinguishes fungi from plants?
  • Which pesticide application is the most effective for penetrating wood-boring beetle control tunnels but is also the most hazardous to handle?
  • Before treating a basement from the outside, what should be checked?
  • What characteristic makes carbonates effective against termites?
  • In treated areas, what additional measure is often recommended for effectiveness?
  • Which term describes the process of termites eating wood and causing structural damage?
  • Which type of termites make nests by boring into wood?
  • What type of pest is characterized by an elongated snout?
  • Which of the following flies is known to inhabit garbage and pet manure?
  • What is considered the optimal temperature range for fungi growth?
  • What distinguishes a carpenter ant infestation from a termite or wood-boring beetle infestation?
  • How many eggs typically make up the first batch laid by a queen in a new subterranean termite colony?
  • What is the primary concern when managing wood-destroying pests?
  • Harpoon and choker traps are primarily used to control which animal?
  • How long before a newly established termite colony will seriously damage structural wood?
  • What does soil treating aim to achieve?
  • How are chemical pheromones used within termite colonies?
  • Which of the following is NOT required from commercial pesticide applicators in Michigan?
  • Organophosphate insecticides are broken down in humans mainly by which organ?
  • Which is not true about the use of biotermiticides in preventing termite infestations?
  • What are the characteristics of termite baits that allow them to spread throughout a colony?
  • True or False: Pesticide drift is a concern for Category 7B applicators.
  • True or False: In most cases, residual sprays provide effective control of wood-boring beetle infestations.
  • What device is used to prevent contaminated water from entering the water supply?
  • What is one treatment option for drywood termites?
  • What should be checked after drilling is completed and before treatment around subslab heating ducts?
  • Which statement is true about termite colony formation by budding?
  • What are pheromone traps primarily used for?
  • Which statement is true about termite swarms compared to ant swarms?
  • Which of the following benefits does the use of borates provide?
  • Regular dusting is particularly effective for eliminating which type of spider?
  • Which of the following is a true statement about hide beetles?
  • What is one disadvantage of biotermiticides?
  • Why is moisture management important in pest control?
  • What kind of wings do supplementary reproductives have?
  • What feature can indicate a carpenter ant’s presence compared to other wood-destroying pests?
  • If soil treatment is to be made near foundation walls by a well or cistern, what is a general best practice?
  • Which type of synthetic insecticide is considered to have low toxicity and is effective against wood-destroying fungi and insects?
  • In foundation treating, what is the main objective?
  • What feature distinguishes sapstaining fungi from other fungi?
  • Which fly species is specifically attracted to fermenting materials?
  • What is one role of synthetic insecticides in pest management?
  • Powderpost beetles primarily inhabit what type of wood?
  • What is the easiest time to apply a barrier treatment for termite control?
  • Which application is deemed best for subslab heating ducts?
  • Which regulation in Michigan expands pesticide record-keeping requirements?
  • What is the most common method of interior slab treatment?
  • What type of rodenticide is applied to a rat's fur and ingested during grooming?
  • What is the minimum required time to remain out of a classroom after applying pesticides?
  • What typically occurs when soft rot fungi attack wood?
  • Long rodding shares advantages similar to which method?
  • How should termite infestations be managed around basement windows and wooden sills?
  • What kind of spores are typically included in mold growth?
  • When treating slabs with heating ducts, reconsider treating if the ducts:
  • Soil treatment with most termiticides should not occur in which location?
  • True or False: Commercial pesticide applicators can claim endorsements from federal or state agencies.
  • Which federal legislation classifies pesticides as general use or restricted use?
  • Which approach is effective in managing wood-destroying pests?
  • What behavior is commonly observed in rats regarding new objects?
  • An example of how an insect growth regulator functions in an insect is by:
  • What do female carpenter bees do upon returning to their nests?
  • Can some beetle species survive and reinfest wood after it has been kiln dried?
  • What is the minimum re-entry interval after applying insecticides in a school room?
  • What should be the distance between holes for effective pest control?
  • Which statement about backflow preventers is incorrect?
  • What strategy is effective in discouraging pigeon nesting?
  • Which statement about controlling carpenter ant infestations is false?
  • Which of the following is true about the crawl space trench?
  • Which of the following statements about the treatment of wood decay is correct?
  • What is the recommended spacing of openings for proper ventilation in crawl spaces?
  • What is the best treatment method for structures with in-ground foam insulation?
  • What is the typical capacity of a tank used in termite control with a power sprayer?
  • What is a common misconception about termite bait stations in relation to dirt-filled porches?
  • What is considered the first step in correcting a fungus condition?
  • Which insect constructs nests in wood but does not consume it?
  • How long should termites be exposed to 140 degrees F in heat treatment?
  • Where is the highest population of German and Brown-Banded cockroaches typically found?
  • In which environment are carpenter ants most likely to be found?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy